Tech Tip: Easily customize substructure-free PM 9 pressings with VM 9 ADD-ON powders.

Yes! I want to take advantage of PM 9 special offers.

PM9 Add-Ons Tech Tip
Valid on purchases made by December 30, 2016. Offers may not be combined with any other promotions or discounts. VITA North America reserves the right to discontinue or change the offers at any time without notice. No cash value. © 2016 VITA North America.
Restorations made from VITAPM®9 without zirconium oxide support may only be individualized with the low-melting VITAVM®9 ADD-ON materials at 780°C to avoid any deformation during firing. Use VITA Glaze LT powder or paste for glazing at 780°C
(low temperature).

Since substructure-free VITA PM 9 restorations have a lower strength than restorations with zirconium oxide support, they may only be cut back up to one third to individualize them with VITA VM 9 ADD-ON materials later on. Deep notches must be avoided prior to individualizing.

In addition, VITA VM 9 ADD-ON materials can be used as corrective materials when repairing or adding color nuances to layered VM 9 restoration. The low-fusing VM 9 ADD-ON materials are ideal to add that last minor characterization without distorting your final restoration.


vita-pm9-instructions-for-use-l-1450Reduced anterior crown for individualization
with VITA VM 9 ADD-ON.







Individualizing with VITA VM 9 ADD-ON.






vita-pm9-instructions-for-use-l-14503Individualized anterior crown prior to firing






vita-pm9-instructions-for-use-l-14504Platinum pins should be used since the black firing pins may adhere to
substructure-free restorations and – due to the shape – cause cracks
in the incisal edge.





vita-pm9-final-add-onCompletely individualized restoration on the working model






 Download the working instructions to learn more.