VITA YZ DISC HT
Pre-sintered circular blanks made from yttria partially stabilized zirconia (Y-TZP)
VITA YZ DISC HT is a high-translucent, pre-sintered circular blank made from yttria partially stabilized zirconia (Y-ZTP).
This material is distinguished by natural light refraction properties. Due to the high level of translucency of VITA YZ DISC HT, veneering is not required.
VITA YZ DISC HT is a relatively inexpensive yet attractive alternative to non-veneered or partially-veneered metal restorations.
Feature/Benefits
- Outstanding esthetics and biocompatibility.
- Thanks to the high translucency, fully anatomical restorations can be fabricated, which do not need to be veneered.
- Relatively inexpensive and attractive alternative to non-veneered or partially-veneered metal restorations.
- VITA YZ DISC HT has a high flexural strength of > 900 MPa.
- Thanks to its remarkable stability, VITA YZ DISC HT can be used to fabricate delicate restorations that support non-adhesive cementation.
- VITA YZ DISC HT can be sintered in the VITA ZYRCOMAT 6000 MS using the HighSpeed mode.
Indications:
Fully anatomical restorations, anterior and posterior crowns and multi-unit bridges.
[popup url=”http://vitanorthamerica.com/wp-content/uploads/2015/03/YZ-DISC-HT.pdf”]• VITA YZ DISC HT[/popup]
• VITA YZ Technical and scientific documentation (10160E)
• VITA YZ DISC HT Product Brochure (1981E)
• VITA YZ HT – precision esthetics (10155E)
• VITA YZ HT Working Instructions (10166E)
• VITA YZ DISC Working Instructions (1649E)
VITA YZ HT SHADE LIQUID
These liquids are designed to color monolithic VITA YZ HT restorations, prior to sintering. VITA YZ HT SHADE LIQUIDs are available in 7 VITA classical A1-D4® shades and in 7 VITA SYSTEM 3D-MASTER® shades, as well as additional supplementary shades for the gingival, cervical and incisal areas.
VITA YZ DISC
Pre-sintered DISCs made from yttrium-stabilized zirconium oxide (Y-TZP)
VITA In-Ceram YZ thanks to its outstanding material strength (> 900 MPa) enables the fabrication of delicate crown and bridge structures with optimum marginal accuracy. VITA In-Ceram YZ is considered as the “diamond” among dental ceramics! VITA In-Ceram has been a leading all-ceramic restorative material for over 14 years, with extraordinarily successful long-term clinical results.
This powerful combination of technology, software and materials means complete reliability and flexibility to meet patient and dentist expectations.
Substructures are veneered with the VITA VM 9 veneering ceramic. VITA customers benefit from a perfectly matched system of veneering and substructure ceramic.
Feature/Benefits
High clinical safety / load strength:
A very high material strength (> 900 MPa) and excellent fracture toughness values. Around 10 years of clinical experience.
Excellent marginal fit / high quality:
The extremely homogeneous material ensures a consistently high degree of marginal accuracy and distortion-free sintering. The precise determination of the scaling factor for each batch - and the information stored on the DISC – guarantee a controlled degree of sintering shrinkage, and hence optimum precision.
Wide range of indications:
VITA In-Ceram YZ covers all indications from crown substructures to multi-unit bridge substructures with ten bridge units with a maximum of two adjacent pontics.
HighSpeed sintering:
In 80 minutes with the VITA ZYRCOMAT 6000MS.
Indications:
Anterior and posterior crowns and multi-unit bridges
Shades:
VITA In-Ceram YZ can be shaded with YZ COLORING LIQUIDS. Also available in the three color nuances light, medium and intense.
[popup url=”http://vitanorthamerica.com/wp-content/uploads/2015/03/YZ-DISC.pdf”]• VITA YZ DISC T[/popup]
